BOXLIGHT CP-12tA manual Video Input

VIDEO INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Choose Video by pressing the INPUT button on the Top Control or on the Remote Control.

If the projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below).

RGB Scart Input

To select RGB Scart 21-Pin video input through the COMPUTER IN 2

/MONITOR OUT terminal, see "COMPUTER INPUT (RGB Scart 21- Pin Video Input)" on page 22.

INPUT button

Video

Computer 1

Computer 2 ✽

VIDEO button

Video

✽When the Monitor out is selected at the Terminal item in the SETTING Menu, Computer 2 is not dis- played.

MENU OPERATION

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT button to move the red
	frame pointer to the INPUT Menu icon.
2	Press the POINT DOWN button to move the red arrow pointer to
	Video and then press the SELECT button. The Source Select
	Menu will appear.
3	Move the pointer to the source that you want to select and then
	press the SELECT button.
		When selecting Auto, the projector automatically detects
	Auto
		incoming video signal, and adjusts itself to optimize its
		performance. The projector selects connection in the
		following order:
		1st Y-Pb/Cb-Pr/Cr
		2nd S-VIDEO
		3rd VIDEO
		The Y-Pb/Cb-Pr/Cr has priority over the S-VIDEO. The
		S-VIDEO has priority over the VIDEO.
		When video input signal is connected to the VIDEO jack,
	Video
		select Video.
		When video input signal is connected to the S-VIDEO
S-Video
		jack, select S-Video.

Y,Pb/Cb,Pr/Cr When video input signal is connected to the Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

INPUT MENU

	Move the pointer to
VIDEO	Video and press the
	SELECT button.

Source Select Menu (VIDEO)

Move the pointer to the source and press the SELECT button.

✽When the Monitor out is selected at the Terminal item in the SETTING Menu, Computer 2 is not dis- played.

31