– 44 –

OTHER FUNCTION SETTING

This projector has other function settings; Blue back, Display, Ceiling, Rear, Split wipe and Lamp age.

BLUE BACK

When this function is in the “On” position, the projector will project a blue image without video noise on the screen when the
video source is unplugged or turned off.

DISPLAY

When this function is in the “On” position, on-screen displays always appear when adjustments are made. Although these
on-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. To avoid this,
you can keep back certain displays by switching this function “Off”. The followings are the displays that you can hide.
¡Wait Display
¡Mode Display
¡Volume Display
¡Mute Display
¡Zoom/Focus Display
¡Normal Display
¡No show Display

CEILING

When this function is in the ‘’On’’ position, the top/bottom and the
left/right picture reverse capability lets you project from a ceiling-
mounted projector.

REAR

When this function is in the ‘’On’’ position, the left/right picture reverse
capability lets you project onto a rear projection screen.

SPLIT WIPE

Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black image side
ways when the input source is changed.
Change the input source by MODE button. The picture is replaced by black image from side ways to the center, and the
next one appears from the center to side ways like drawing the black curtains.

LAMP AGE

The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lamp
replacement monitor timer by using this function.
TBTBLRLR