BOXLIGHT manual External Control Panel, BOXLIGHT XD-15c User’s Guide

BOXLIGHT XD-15c User’s Guide

External Control Panel

	Exit
Keystone/ Left	Keystone/ Right
Menu
Auto Source	Power

Lamp status indicator

•The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals from the remote control. For best results, be sure to aim the control toward the sensor without any obstructions between the two, and at a distance no greater than 6 meters (20 feet).

•Menu will display the menu system on screen. Press Menu again to access the sub-menus. Left and Right help you navigate among choices and settings in the menus and sub-menus. However, when the on screen menu is not activated, the Left and Right buttons will function as Keystone +/- hot keys.

•Press the Exit button to go back to the main menu. Press Exit again to leave the menu system.

•The Status Indicator will blink or light up when the lamp needs service, cooling or replacement. See “Lamp Information” on page 20 for more detailed information.

•When the projector is on, Back-lit Power will blink during warm-up and turn to solid green to indicate the projector is ready for use.

•Press and hold Power for 1 second to turn the projector on or off.

•Auto key: Automatically sense the best picture quality for current received signals.

•Source key: Select signal sources, PC, Video, S-video and YPbPr.

6 Introduction