Bradford-White Corp 238-47878-00B 04/10, ACCESSORY MODULE Including Protection, Performance, and Inlet Shut-off Valve Packages operation manual

Setback Control Installation
-27-
In the following section, the instructions detail how to install the Setback Control on the water
heater. The Accessory Module must be installed for the Setback Control to work with the water
heater gas control.
Unpack the Setback Control Junction Box Assembly
Step 1: Remove the Setback Control Junction Box Assembly and its components from their packaging.
This is shown in Figure 28.
Unpack the Setback Control
Step 2: Remove the Setback Control and its batteries from their packaging, as shown in Figure 29.
Figure 28
Figure 29
Supplied AAA
Batteries
Setback
Control