Maintenance, Features, Repair Policy

MAINTENANCE

•Turn machine off when not in use.

•Remove liner material from take-up hub when it reaches approximately 2" in diameter or if the motor appears to be straining.

•Do not operate machine without covers in place.

•Do not operate if inspection reveals a damaged power or sensor cord.

•Keep strip plate, hold down brush and hub free of adhesive build-up.

•Will dispense butt-cut and die-cut material.

•Adjustable photosensor for pinpoint accuracy.

•Handled lock rod makes scrap removal easy.

•No tools required for adjustment.

NOTES

•Keep strip plate free of adhesive build-up.

•Clean photosensor with compressed air or dry cloth.

•Do not drop the dispenser or subject it to heavy shock.

•Turn off machine when not in use.

Contact BRADY CORPORATION to determine nature of problem.

Furnish Brady with the following information:

1.Who the unit was purchased from.

2.Model number and serial number.

3.Date purchased (copy of invoice or packing slip required).

Brady will issue an RGA (Return Goods Authorization) for repair. Return machine to Brady by UPS, insured and prepaid.

Brady will notify the customer if there is a repair charge.

*speed calculated at 60 Hz