Description

1Foil protection cap

2Shaver foil

3Cutter block

4Long hair trimmer

5Charging light

6On/off switch

7Special cord set

Charging

The best environmental temperature for charging is between 60 °F to 95 °F/ 15 °C to 35 °C.

Using the special cord set, connect the shaver to an electrical outlet with the motor switched off.

When charging for the first time, leave the shaver to charge continuously for 4 hours. The green charging light (5) shows that the shaver is being charged. When the battery is fully charged, the charging light intermit- tently blinks on and off. This indicates that the battery maintains its full capacity.

A full charge provides up to 30 minutes of cordless shaving time depending on your beard growth.

Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity. Subsequent charges will take about 1 hour.

Maximum battery capacity will only be reached after several charging/ discharging cycles.

If the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set.

Shaving

Remove the foil protection cap (1). Activate the on/off switch (6). The floating foil frame automatically adapts to your skin surface for a close, smooth shave.

For pre-shaving after a few days of not having shaved, use the long hair trimmer (4) to pre-cut long hairs. For a close, smooth shave, finish with the foil.

8

Page 7
Image 7
Braun 1775 manual Description, Charging, Shaving