Braun 3240 manual Description see, Before starting off, How to epilate, Some useful tips

In some cases inflammation of the skin could occur when bacteria penetrate the skin (e.g. when sliding the appliance over the skin). Thorough cleaning of the epilation head before each use will mini- mise the risk of infection.

If you have any doubts about using this appliance, please consult your physician. In the following cases, this appliance should only be used after prior consul- tation with a physician:

–eczema, wounds, inflamed skin reactions such as folliculitis (purulent hair follicles) and varicose veins

–around moles

–reduced immunity of the skin, e.g. diabetes mellitus, during pregnancy, Raynaud’s disease

–haemophilia or immune deficiency.

Some useful tips

Epilation is easier and more comfortable when the hair is at the optimal length of 2–5 mm (0.08–0.2 in.). If hairs are longer, we recommend to pre-cut to this length.

When epilating for the first time, it is advis- able to epilate in the evening, so that any possible reddening can disappear over- night. To relax the skin we recommend applying a moisture cream after epilation.

Fine hair which re-grows might not grow up to the skin surface. The regular use of massage sponges (e.g. after showering) or exfoliation peelings helps to prevent in-growing hair as the gentle scrubbing action removes the upper skin layer and fine hair can get through to the skin surface.

Description (see page 4)

14-way moving pain softener B Standard epilation head

b Starter epilation head with reduced

number of tweezers

3 Release buttons

4 Switch

5 Socket for cord connector

6 Cord connector

7 12 V transformer plug

Before starting off

•Your skin must be dry and free from grease or cream.

•Before starting off, thoroughly clean the epilation head you want to use (Bor b).

•To remove the epilation head, press the release buttons 3 on the left and right and pull it off.

•Click the desired head into place:

–Choose the starter epilation head b if you are epilating for the first time or if you have very sensitive skin.

–Once your skin is used to epilation,

you may switch to the standard epilation head B which allows a more efficient and faster epilation thanks to its greater number of tweezers.

•Make sure that the 4-way moving pain softener 1 is in place.

•Plug the cord connector 6 into the socket 5 and plug the transformer plug 7 into an electrical outlet.

How to epilate

1To turn on the appliance, slide switch 4 to setting «2»

(«2» = normal speed, «1» = reduced speed).

2Rub your skin to lift short hairs. For optimum performance hold the ap-

9