Alternatively, you may clean the shaver using the brush provided:
•Switch off the shaver. Remove the shaver foil.
•Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil.
•Put a drop of light machine oil onto the long hair trimmer and the shaver foil.
Replacement light for shaving parts / Reset To maintain 100% shaving performance, replace your foil and cutter block, when the replacement light for shaving parts (8) comes on (after about 18 months) or when worn. Change both parts at the same time for a closer shave with less skin irritation.
(Shaver foil and cutter block: 31S)
The replacement light will remind you during the next 7 shaves to replace the shaving parts. Then the shaver will automatically reset the display.
After you have replaced the shaving parts (foil and cutter block), use a
While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time.
Preserving the batteries
In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (by shaving) every 6 months approximately. Then recharge the shaver to full capacity. Do not expose the shaver to temperatures higher than 122 °F/50 °C for extended periods of time.
Environmental notice
This appliance contains rechargeable batteries. To protect the environment, do not dispose of the appliance in the
household waste at the end of its useful life. Disposal can take place at a Braun Service Center or appropriate collection sites.
Caution: Opening the housing will destroy the appliance and invalidate the guarantee.
Subject to change without notice.
For electric specifications, see printing on the special cord set.
7
