English

Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance.

Braun exact 6 memory universal This appliance can be operated on all international alternating current outlets. Its built-in rechargeable cell permits 2-way beard trimming: either with the cord connected directly to an outlet (cord operation) or without the cord via the rechargeable cell (cordless operation).

Specifications

Voltage range: 100 - 240 V (~) 50 - 60 Hz

Wattage: 3.5 W

Trimming system: cutting unit 3, trimming width 34 mm,

distancing comb 4 for 6 beard length settings (2, 5, 8,11,14,18 mm) Memory function

Charging time: 2 hours

Quick charge for one trim: 10 minutes

Operating time: approx. 60 minutes (fully charged)

The best environmental temperature range for the trimmer is between

15 °C - 35 °C. The trimmer should never be exposed to temperatures of less than 0 °C and more than 40 °C for longer than a few hours.

Do not wind the cord around the appliance.

Environmentally friendly cell unit For environmenfal reasons, this appliance is provided with a nickel- hydrid cell unit. This cell unit does not contain any poisonous heavy metals.

2

Nevertheless, in the interest of recycling raw materials please do not dispose of this appli- ance in the household waste at the end of its useful life.

Disposal can take place at a Braun Service Centre or at appropriate collection sites.

Description

1Pilot light

2Switch (on/off), cutting lenght)

3 Cutting unit

4 Distancing comb

5 Memory-Switch

6 Cleaning brush

Cord operation

The trimmer is ready for use immediately via cord operation (i.e. when the trimmer is connected directly to an electrical outlet).

lf the trimmer should, however, not run immediately due to a completely empty cell, recharge the trimmer for approx. 1 minute (switch turned off = «0»), which is sufficient to permit trimming via cord operation (after turning the switch on again).

Cordless operation

Turn the trimmer off (switch 2 set to «0»), connect the cord to the trimmer and plug into an electrical outlet.

Recharge for 5 hours. The pilot light 1 is illuminated at the beginning of the charging process and changes to flashing as the appliance is being charged, with increasingly longer pauses. When recharged, unplug the trimmer. The trimmer should not stay connected to an outlet for several weeks. Occasional overcharging for several days will, however, not damage the trimmer.

3

Page 2
Image 2
Braun 5281 manual Description, Cord operation, Cordless operation