Braun 6085, 6084 manual Turning off, Memory mode, Recalling stored readings

Turning off

Press the on/off button to turn the product off. Otherwise the product will turn off automatically after 2 minutes.

Memory mode

Your blood pressure monitor can store the readings of 100 measurements (BP 3550 model: 80 measurements). Storing is done automatically after each completed measurement. The memory is non-volatile. This means that you will not loose stored data when changing batteries. The memory cannot be cleared. Once the memory is full, the oldest values will be overwritten.

Recalling stored readings

To recall stored readings, first turn the product off, then press the memory button (E). A single push (m or n) will recall the latest reading. The lower display line successively shows memory index and pulse on the one hand and date and time of the respective measurement on the other hand. The memory reading also includes the feedback from the confirmation system as described above.

Repeatedly pressing the memory button (E) will call up one by one all stored readings:

m(–) towards older readings

n(+) towards younger readings

Scrolling

Keep one side of the memory button pressed for scrolling through the memory.

Press the on/off button (C) to exit the memory mode.

9