Description, Charging the shaver | Braun 6510, 6520, 6515 specification

Flex Integral 6515

Flex Integral 6510

Our products are designed to meet the highest

standards of quality, functionality and design. English We hope you entirely enjoy your new Braun

shaver.

Caution

•Do not use the shaver near, or over, basins filled with water (e. g. bath tubs, showers etc.).

•For safety reasons, periodically check the cord for damage and replace it, if it is loose in the shaver socket.

1 Description

1Foil protection cap

2 Triple shaving frame

3 Duo cutter block

4 Release button

5 Long hair trimmer

6 Switch

7 Switch lock

8 Low-charge light (red) (only 6520/6515)

9 Charging light (green) j Shaver socket

•When charging the shaver for the first time, connect it to the mains and charge it for at least

4hours (switch position «0»).

Then shave without the cord until the red low- charge light starts flashing.

(Modell 6510: Shave without the courd until the shaver runs distinctly slower.)

•Subsequent charges will take approximately

1hour.

•Wattage: 6 Watts

Voltage range during charging: 12 - 240 V Q /

50or 60 Hz (automatic adaption).

Best environmental temperature range for charging: 15 °C to 35 °C