trim |
mer |
washable |
on |
release |
washable |
er |
oil |
release |
washable |
click! |
release |
trimmer |
release |
| washable |
release | release |
washable | washable |
release | 70S |
| washable |
| mer |
Regular cleaning ensures better shaving performance. Rinsing the shaving head under running water after each shave is an easy and fast way to keep it clean:
•Switch the shaver on (cordless) and rinse the shaving head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
•Next, switch off the shaver, press the release button 2 to remove the foil and cutter cassette 1 and let it dry.
•If you regularly clean the shaver under water, then once a week apply a drop of light machine oil on top of the foil and cutter cassette.
Alternatively, you may clean the shaver using the brush provided:
•Switch off the shaver. Remove the foil and cutter cassette 1 and tap it out on a flat surface. Using the brush, clean the inner area of the pivoting head. However, do not clean the foil and cutter cassette with the brush as this may damage it.
Keeping your shaver in top shape
Replacing the foil and cutter cassette/reset To maintain 100% shaving performance, replace the foil and cutter cassette 1, when the replacement symbol lights up on the shaver display 7 (after about 18 months) or when cassette is worn.
The replacement symbol will remind you during the next 7 shaves to replace the foil and cutter cassette. Then the shaver will automatically reset the display.
After you have replaced the foil and cutter cassette, use a
While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time.
6
