2 1 0
6
7540
+35°C 
+15°C 
7540
Your Braun Syncro (7546 only) is supplied with a Braun Clean&Charge (please see separate use instructions).
Important
Only use the power supply cord set provided. A damaged cord must be replaced immediately.
Description
1 | Foil protection cap | 7 | Charging lights |
2 | Shaver foil |
| (green) |
3 | Cutter block | 8 | |
4 | Foil release button |
| (red) |
5 | Long hair trimmer | 9 | Pilot light |
6 | Switch | 10 | Shaver socket |
Technical specifications:
•Wattage via cord set: 7 W
•Power supply via cord set:
•Shaver input voltage:
Charging the shaver
•First charging: Using the power supply cord set,
plug the shaver into an electrical outlet with the switch on position «0» and charge it for at least 4 hours (plug might get warm).
•Once the shaver is completely charged, shave without the cord until fully discharged. Then recharge to full capacity again (subsequent charges will take about 1 hour).
•A full charge will give up to 50 minutes of cordless shaving time depending on your beard growth. However, the maximum battery capacity will only be reached after several charging/discharging cycles.
•Best environmental temperature range for charging is 60 °F to 95°F / 15 °C to 35°C.
Indicator lights
•The pilot light shows that the shaver is plugged into the outlet properly.
