English
The Oral-B® ProfessionalCare™ 8500
OxyJet® irrigator mixes air into water in the form of
Please read the use instructions carefully before first use.
Important
The appliance must be mounted in a way that it cannot fall into water. The plug should always be accessible. Periodically check the cord for damage. A damaged or
Description
aIrrigator jet
bJet switch
cJet compartment
dJet release button
eOn/off switch
fWater pressure control dial
gHandle switch (water stop and go)
hIrrigator handle
iWater container (600 ml /20 fl. oz.)
jCord Storage
Specifications
Power supply: see bottom of housing
Power intake: 24 W
Using the Oral-B®
ProfessionalCare™ 8500
OxyJet® Irrigator
Before using for the first time, fill the water container and allow the water to run through completely by holding the irrigator handle over a washbasin.
1.Attach one of the irrigator jets to the handle until it locks into place. Fill the water container with water and add mouthwash, if desired.
2.Turn on the irrigator by pressing the on/off switch. (When doing so, the handle switch should be in the lower position = water stop.)
3.Select the water pressure with the pres- sure control dial (1 = gentle, 5 = strong). We recommend that you start with set- ting 1, especially if your gums tend to bleed or if children are using the irrigator.
4.Bend over the washbasin and guide the jet to your teeth and gums. Slide the handle switch up to start the water stream. Keep your mouth slightly open to allow the water to run into the washbasin.
You can choose between two different jet functions by sliding the jet switch down or up (before doing so, turn off the water stream by sliding the handle switch down):
7
