Braun 8985 manual We recommend cleaning after each shave, Start

The display for cleaning fluid (6) will show how much cleaning fluid is in the cartridge:

a)cleaning solution sufficiently available

b)up to 7 cleanings left

c)new cartridge required

a		b		c
cartridge	full	cartridge	full	cartridge	full
	empty		empty		empty

Make sure the foil protection cap (9) is removed from the shaver. Insert the shaver head down into the station (the contacts (14) on the back of the shaver will correspond to the contacts (3) in the station). If necessary, the system will now charge the shaver.

Also, the cleaning status will be automatically analyzed and one of the four diodes of the cleaning program display

(5)will light up:

a)the shaver is clean

b)eco(nomic), i.e. short cleaning required

c)normal cleaning required

d)intensive cleaning required

start

trim

fix on off

cl eaning

cartridge

select auto

clean eco normal intensive

full

empty

select auto

clean	a
eco	b
normal	c
intensive	d

If the system has selected one of the three cleaning programs, it will not start until you push down the «start cleaning» button (2). This locks the shaver into the station and starts the cleaning process.

We recommend cleaning after each shave.

While the cleaning is in progress, the respective cleaning program light will flash. Each cleaning consists of several cycles (where the cleaning fluid is flushed through the shaver head) and a heat drying period. The total cleaning time is 33 to 50 minutes.

Cleaning processes in the Clean&Renew™ should not be interrupted. While the shaver is drying, the metal parts of the shaver may be hot. Also, if the shaver is taken out prematurely and is not dry, its electronics could be harmed.

8990
reset
foil
replacel+cutter
	trim
	fix
	on			clean
	off	se	lect	eco
				normal
		auto		intensive
start	g
	cleanin	cartridge		full
				empty

select auto

clean eco normal intensive

When the program is finished, the blue «clean» light will shine. You can release the shaver by pushing the «start cleaning» button.

Your shaver is now clean and ready for use.

	select	clean
auto		eco
		normal
		intensive

13