Braun FG 1100 manual English, Description, Inserting the battery, Using the cutting heads

English

Thank you for purchasing the Braun SilkFinish Precision Hair Remover which precisely and safely removes unwanted hairs from body, face and bikini area. We hope you will enjoy using the appliance. Please read the use instructions carefully and thoroughly before using it.

Important

Keep the appliance out of the reach of children.

For hygienic reasons, do not share this appliance with other persons.

Do not use the appliance on irritated or inflamed skin.

Never use the appliance with a damaged cutting head.

Description

1Protective cap

2Precision cutting head

3Bikini zone cutting head

3a Bikini zone trimming comb, 5 mm

3b Bikini zone trimming comb, 8 mm

4On/off switch «1/0»

5Battery compartment cover

6Brush

Inserting the battery

This appliance operates with one AAA

1.5V battery. For best performance, use an alkaline manganese battery (type LR03, AM4, AAA, e.g. Duracell). This battery provides a shaving capacity of approximately 120 minutes. Frequent use of the bikini zone cutting head (3) will reduce the operation time.

• Make sure the appliance is turned off.

• Remove the battery compartment cover

(5)by pulling downwards (a).

•Insert the battery with the (+) and (–) poles in the direction marked.

•Close the battery compartment.

Note: If the appliance is not used for long periods of time, do not leave the battery inserted (danger of leakage). Take an expired battery out of the appliance immediately.

Used batteries should not be disposed of with the household waste. Please dispose of them at special collection points or return them to your retailer or authorised service centres.

Using the cutting heads

The Braun SilkFinish comes with different cutting heads that are uniquely contoured to remove unwanted hairs on every curve of your body, face and bikini area.

Getting started

•Remove the protective cap (1).

•Slide the on/off switch (4) up to turn the appliance on.

•Place the cutting head near to the hair to be removed and guide it slowly against the direction of hair growth. For optimum results, pull the skin taut with one hand while using.

•Turn the appliance off before changing the cutting heads.

•To remove the cutting head, rotate it counter-clockwise 90°, then lift it (b). To attach another one, insert it into the opening, then rotate 90° clockwise until it clicks into place.

The precision cutting head (2) is perfect for detailing of eyebrows and removal of stray hairs on all body areas.

The bikini zone cutting head (3) is ideally suited for use in the bikini area to cut precise lines or contours like the bikini line.

6