OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Read all the sections of this booklet and follow all the instructions carefully.
Cleaning Instructions
Hints
Before Using for the First Time
1.Remove all promotional labels from the drink maker. Wash the container in hot soapy water and dry thoroughly.
2.Clean the mixing blades and shaft with a damp cloth and dry thoroughly.
Warning: Do not immerse unit in water or any other liquid for cleaning.
Using the Drink Mixer
1.Place the drink maker on a level, dry surface. Plug the unit into a 120 volt wall outlet.
2.Make sure that the 2 speed switch is in the center (0) “Off” position (Fig. A).
3.Combine the ingredients in the container. Do not overfill the container beyond the “MAX” line (Fig. B).
4.Hold the container and place it into the drink maker. Make sure that the top of the container
is placed behind the upper interlocking bracket that supports the container (Fig. C). The base of the container should rest on the bottom bracket pressing on the safety switch. (Fig. D).
5.Switch on the
6.Choose speed (l) or (ll) according to the ingredients that you are using. (Fig. E).
7.When your drink is ready, press the
(0) position to stop the unit
(Fig. A).
8.Remove the container by lifting it upwards slightly to release it from the bottom bracket and serve.
Fig. A | Fig. B |
Fig. C | Fig. D |
Fig. E
Warning: Always remove the plug from the wall outlet before cleaning or storing the unit. never immerse the unit, cord or plug in water or any other liquid.
1.To clean the blade, fill the container with one (1) cup of warm water. Operate the drink maker on speed “1” as previously described in operating instructions. Unplug unit from wall outlet. Dry mixing blades and shaft with a soft dry cloth.
2.Wipe the motor housing with a damp cloth. Make sure that the cloth is not excessively wet and that no moisture enters the vents on the motor housing.
3.Wash the container in warm, soapy water.
Do NOT use abrasive cleaners of any type to clean either the unit or the container.
DO NOT IMMERSE THE APPLIANCE IN WATER OR ANY OTHER LIQUID.
1.When preparing milk shakes note that the volume of a milk shake will vary according to the type of milk used.
2.It is important to follow guidelines in the recipes to avoid spillage from the container.
3.Always remember that solids such as ice cream or fruit will increase the volume of the milk shake.
4.The container must always be filled at least to half the distance to the “MAX” line or the liquid will not reach the blade.
5.When mixing do not fill above the maximum level (8 oz./1 cup/250 ml) or liquid will overflow.
6.For best results, all liquid ingredients should be as cold as possible.
7.All syrups and powdered mixes should be added just before mixing to prevent them from sinking to the bottom of the container.
8.The Drink Maker does NOT crush ice. For best results, use crushed ice if the recipe calls for ice.
3
4
