Read all the sections of this booklet and follow all the instructions carefully.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
To Operate the Hand Mixer
• When you have inserted the desired |
attachment, insert the plug into the |
Before using your Bravetti Hand Mixer for the first time, wash the beaters and dough hooks in warm, sudsy water.
Rinse and dry thoroughly.
Warning: To avoid injury when inserting or removing beaters or dough hooks always set the speed selector on ”0" and unplug the appliance.
Warning: The unit is designed for intermittent use. The maximum operating time on settings
Beaters, Dough Hooks:
Select the attachment according to the type of mixing required. Make sure that the mixer is unplugged from power source and speed selector is set on ”0" before inserting or removing beaters or dough hooks.
Beaters:
Use for liquid mixes such as creams,
Dough Hooks:
Use for light doughs. Insert dough hooks in the same way as beaters. See installing instructions for beaters in previous section. Always use both dough hooks. Never try to work with one beater and one dough hook at the same time. Do not use dough hooks at low speeds as this may cause motor to overheat. When using dough hooks for heavy or thick dough, use only high speed (3) from the beginning to prevent the motor from overheating (blocking).
Large Opening | Locator |
| |
| Ring |
Bottom View
Warning: Never operate the appliance without all the parts in place. Make sure that all parts are properly assembled before turning on the unit.
•Gently pull the power cord from the main unit.
Caution: Do not pull with force on the power cord or you will damage the rewinding feature and void the warranty. When rewinding, always hold the plug to avoid cord whipping.
•Before plugging in the unit, fit the desired attachment required for the mixing operation to be carried out.
•Insert the beaters or the dough hooks one at a time by pressing them gently upwards until they are fully fitted and you hear a click. Make sure that the attachment with the locator ring is inserted into the larger hole opening. (See illustration below.)
Large Opening | Locator |
| |
| Ring |
Bottom View
electrical outlet. |
• Pick up the mixer and use your thumb |
to set the speed selector and the |
Hi/Lo range selector to the setting that |
you desire. |
Warning: The unit is designed for intermittent use. The maximum operating time on settings
•We suggest that you begin at the highest speed to prevent the motor from blocking.
•Ensure that the beaters are completely free to move in your mixture.
•Return to "0" setting when you have finished using the mixer or you wish to stop.
•To remove the attachments from the mixer, press the accessory eject button. This button only works when the mixer is in the "0” speed setting.
•To rewind the power cord, push the cord rewind button.
Caution: When rewinding, always hold the plug to avoid cord whipping.
must sit below the surface of the mixer housing. To ease the inserting of the beaters, a slight twisting motion will aid in engaging the beater drive tabs. Install the second beater in the same manner as above.
Locator
Ring
SPEED SETTINGS
| HI/LO RANGE SETTINGS | |
|
|
|
SPEED SELECTOR | "LO" | "HI" |
|
|
|
"0" | Off | Off |
|
|
|
"1" | Lowest | |
|
|
|
"2" | Low | High |
Beater
"3" | Highest |
3 | 4 |
