Assembly of Stick Blender
Assembling the Bravetti Do It All 2 Stick Blender:
Make sure that the unit is unplugged from power source before attaching or removing the Stick Blender attachment.
1.Line up arrow of Stick Blender attachment with arrow on power pack. Once fully inserted, rotate stick blender attachment clockwise 90º until arrow on power pack aligns with square on Stick Blender.
Warning: This appliance is designed for intermittent use. Maximum running time with the Stick Blender is 1 minute. After this time, allow the unit to cool.
2.Plug the cord into an electrical outlet (120V~ / 60Hz).
Caution: To avoid splattering, place the Stick Blender attachment
first in the food to be beaten or chopped, then press the button. Always release the button before removing the Stick Blender from the food, especially when using the Stick Blender in hot liquids. Always hold the Stick Blender with your hand while processing. Never leave unit unattended.
Caution: Do not use the Stick Blender on the stove. If you want to use it in a saucepan while cooking, you must first remove saucepan from the stove.
3.Use the measuring beaker/cup with the Stick Blender or you can use another container. The measuring beaker/cup is intended only for processing small quantities with the Stick Blender.
Caution: To remove the Stick Blender attachment from the power pack, first unplug the power pack and only then turn the Stick Blender 90º counterclockwise and pull it off.
Achieving best results with the Bravetti Do It All 2
Stick Blender/Chopper
*Only process very soft, tender pieces of food.
*Food pieces should not be larger than
*Do not fill the processor bowls more than half way with very soft, tender foods like cooked apples or tomatoes. When pureeing foods like cooked vegetables, soft cheese, or cooked poultry, only add a few pieces at a time so that the Stick Blender does not jam. In fact, it is always best to batch feed when using the Stick Blender/Chopper.
*Avoid pureeing foods like citrus fruits or other foods that have a lot of fiber or hard, tough skin which can jam the appliance.
*If the Stick Blender should jam during use and the blade stops turning, stop operation and unplug the unit from the power source. Disassemble the unit to remove any food that is jammed.
Caution: Never put your fingers or any utensils in the Stick Blender/Chopper during operation.
Warning: This appliance is designed for intermittent use. Maximum running time with the Stick Blender/Chopper is 15 seconds. Allow unit
to cool before resuming use. Best chopping results are achieved by using
Important: To mince meat, cut the meat into 1/2” cubes and do not mince more than 6 oz. At one time. Make sure that the meat, fish or poultry is fully defrosted and that all bones and gristle have been removed. Allow cooked food to cool before placing in the chopping bowl.
7 | 4 |
