IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1.Read all instructions.
2.Do not touch hot surfaces, always use handles or knobs.
3.To protect against electrical shock, do not immerse cord and plug of this appliance in water or other liquids.
4.Close supervision is necessary when any appliance is used by or near children.
5.Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning the appliance.
6.Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to
7.Never plug in before the control panel is installed in the body of the fryer and the heating element is placed in the oil container.
8.Never overfill the fryer with oil. Fill only between the minimum and maximum levels, as indicated inside the oil container.
9.Be sure handle is properly assembled to the basket and locked in place. See detailed assembly instructions.
10.The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
11.Always insert heating element in the appliance first, then plug into the wall outlet. To disconnect, remove plug from wall outlet then wait for the unit to cool completely before removing the heating element.
12.Extreme caution must be used when moving any appliance containing hot oil or other hot liquids.
13.Do not leave appliance unattended while in use.
14.Do not use outdoors.
15.Do not let cord hang over the edge of the table, counter or touch hot surfaces.
16.Do not place on or near a hot gas or electric burner, or in a heated oven.
17.Do not use appliance for other than intended household use.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
SPECIAL SAFETY INSTRUCTIONS
•A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. An extension cord (or longer detachable cord) is not recommended for use with deep fryers.
•Never plug in the control panel before it is installed in the body of the fryer with the heating element inside the oil container.
•Do not immerse the control panel and heating element in water.
•When opening the lid after frying, first release the lid by pushing the latch with your finger, then wait a moment to allow the steam inside to escape before opening fully.
•To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
SAVE THESE INSTRUCTIONS
1 | REV. 02/01B |
|
