Bravetti F1068H owner manual Using Solid Fat, Pre-Heating

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Using Solid Fat

Warning: Do not put solid shortening in the oil container or the frying basket.

•If using solid vegetable shortening, melt it first in a separate pan and then very carefully pour the melted fat into the oil container.

•Previously used solid vegetable shortening which has curdled and hardened in the oil container should be removed from the oil container and melted in a separate pan before reusing.

Warning: If you try to melt the solidified fat in the oil container, there is a risk of warm melted fat suddenly sputtering from below through the still solid top layer of fat.

Therefore use only the following procedure:

•Make sure the fat is at room temperature. If the fat is very cold, there is a greater risk of splashing.

•Using a fork, carefully make some holes in the fat. Make sure the lid is securely closed while fat is melting. Press the "Function" Reset button and press timer button to set the time you require.

Installing the “Control Panel with the Heating Element” into its Place

•Lift up the control panel with heating element.

•Insert the “guide edges" on the control panel into the “guide rails" mounted on the metal body. (Fig. 3)

•Slide the “guide edges" down till the end.

Guide Rails

Important Notice: The automatic safety switch ensures that the unit will not operate unless the control panel has been inserted into the “guide rails" on the metal body correctly. (Fig. 4)

Control Panel

Guide

Edges

Fig. 4

Safety Switch

Heating Element

Using the Electronic Deep Fryer Warning: Never plug in the deep fryer before filling with oil to specified level. Always make sure control panel is securely in place in the body and the heating element is inside the oil in the container before plugging in.

Important: Ensure the control panel is fitted correctly to the main unit otherwise the unit will not function. This is not a defect. This product is fitted with a safety switch to prevent the unit from turning on accidentally.

Pre-Heating

Warning: Never plug in the deep fryer before filling with oil. (See "Filling" instructions on page 4.) Always unplug the appliance when not in use.

•Make sure the oil level in the oil container is between the "minimum“ and "maximum" lines inside the oil container.

•The frying basket should not be immersed in the oil during the pre- heating.

•Replace the lid cover.

•Plug the appliance into a 120-volt outlet. The unit will beep.

•Press the power button. The unit will beep and the power indicator light will come on. It’s showing that the power on. The upper screen display 320 °F and the lower screen displays _ _: _ _ . It’s in constant boiling status.

•Set the required temperature – The temperature is adjustable from 155 °F to 385 °F in 5ºF increments. If you want to elevate the temperature, press the “+” button. When you press the “+” button the unit will beep. If you want to lower the temperature, press the “-” button. When you press the “-” button the unit will beep and the upper screen will display the temperature that you set. When the set temperature is reached, the green ready indicator light come on. (Fig. 5)

•Timer: The MAX timer time is 15 minutes. If you want to add time, please press "+" button. If you want to subtract time, press "-" button. The lower screen will display the time that you set.

•Function Reset : If you press the function reset button, the unit is in default status. The default temperature is 320 °F and the default time is 00:00.

Fig. 3

Back of Main Body

5

Fig. 5
		15.	Digital Display
9.	Function Reset Button
10.	Power Button	16.	Ready Indicator Light (green)
11. / 12. Timer Adjustable Button		17.	Power Indicator Light (red)

13./ 14. Temperature Adjustable Button

6