Bravetti F1100H Filtering & Changing The Oil, Detachable Power Cord, Cleaning Instructions

Fig. 11

Reset Button

Fig. 10

OPERATING INSTRUCTIONS

Filtering & Changing The Oil

•Make sure the deep fryer is unplugged and the oil has cooled before cleaning or storing the deep fryer.

•The oil does not need to be changed after each use. In general, the oil will be tainted rather quickly when frying food containing a lot of protein (such as poultry, meat or fish). When oil is mainly used to fry potatoes and is filtered after each use, it can be used 8 to 10 times. However, do not use the same oil for longer than 6 months.

•To filter the oil first make sure the oil has cooled and then empty the oil from

the oil container into another container or bottle. (Fig. 8) Wash and dry the oil container and basket. Refill the oil container with the oil, pouring the oil through a wire strainer or paper filter. (Fig. 9)

Fig. 8 Fig. 9

Detachable Power Cord

Your deep fryer has been specifically designed with your safety in mind. Your deep fryer has incorporated a unique detachable power supply cord. This power supply cord cord is designed to “Break Away” from the fryer body in the event that the supply cord is inadvertently pulled. This is intended to prevent the tipping of the appliance and hazardous spillage of hot oil.

The female receptacle portion of the power supply cord is permanently attached to the rear of the the control panel.

To connect the male power cord plug to the female receptacle on the appliance, orient the male plug so that it mates with the female receptacle. The male plug can only be inserted one way. If the male plug will not go into the receptacle on the appliance, rotate the male plug 180°.

IMPORTANT: Should the male plug become detached from the appliance during use, it is important to:

1.Unplug the power cord from the wall outlet. (Fig. 10)

2.Turn off the appliance at the control panel.

3.Re-attach the power cord to

the appliance.

4.Re-connect to electrical outlet.

5.Turn the appliance back on.

Cleaning Instructions

Warning: Always remove the plug from the wall socket before cleaning. Allow the deep fryer and the oil to cool completely (approximately 2 hours) before cleaning. Never immerse the control panel, cord or plug in water or any other liquid.

•Follow the cleaning instructions on page 4.

•Never immerse the control panel, cord or plug in water or any other liquid.

•Do not place the control panel, cord or plug in the dishwasher.

•Clean the control panel only with a damp cloth.

•The oil container and frying baskets can be washed in the top rack of dishwasher.

•The deep fryer cover can also be washed in the dishwasher after you have removed the filter.

•The filter can be rinsed. Do not place in dishwasher.

•The body of the deep fryer can be washed in warm soapy water. Do not put the body of the deep fryer in the dishwasher.

How To Reset Deep Fryer

If for some reason your deep fryer stops heating, the reason might be that the safety reset switch has disconnected. To re-start the deep fryer, follow the instruction below:

•Using the back end of a pen, push the

re-set button that is located on the back of the control panel. The deep fryer will beep to

indicate that it has been re-set. (Fig. 11)

8