GETTING TO KNOW YOUR DEEP FRYER
OPERATING INSTRUCTIONS cont.
1. | Body | 11. | Limitation Thermostat |
2. | Body Handle | 12. Detachable Filter | |
3. | Bracket | 13. | Lid Handle |
4. | Oil Container | 14. | Window |
5. | Heating Element | 15. | Fryer Lid |
6. | Adjustable Temperature Control | 16. | Large Frying Basket |
7. | Temperature Indicator Light | 17. | Fryer Handles (x3) |
8. | Power “ON” Indicator Light | 18. | Small Frying Basket (x2) |
9. | On/Off Switch | 19. | Magnetic Power Cord Socket |
10. | Thermostat | 20. | Control Panel With Heating Element |
|
| 21. | Heater Clip |
Technical Specifications
Voltage: | 120V., 60Hz. |
Power: | 1700 Watts |
Oil Capacity: | 5.5 Liters |
Cleaning Instructions
Warning: Always remove the plug from the wall socket before cleaning. Allow the deep fryer and the oil to cool completely (approximately 2 hours) before cleaning. Never immerse the control panel, cord or plug in water or any other liquid.
•Follow the cleaning instructions on page 3. (Before using for the First Time)
•Never immerse the control panel, cord or plug in water or any other liquid.
•Do not place the control panel, cord or plug in the dishwasher.
•Clean the control panel only with a damp cloth.
•The oil container, frying basket, lid cover and filter can be washed in the dishwasher.
•The body of the deep fryer can be washed in warm soapy water. Do not put the body of the deep fryer in the dishwasher.
•Any other servicing should be performed by
LLC.
Detachable Magnetic Power Cord
Your Bravetti Platinum Pro Deep Fryer has been specifically designed with your safety in mind. Bravetti Platinum Pro has incorporated a unique detachable power supply cord. This power supply cord cord is designed to “Break Away” from the fryer body in the event that the supply cord is inadvertently pulled. This is intended to prevent the tipping of the appliance and hazardous spillage of hot oil.
The female receptacle portion of the power supply cord is permanently attached to the rear of the the control panel.
To connect the male power cord plug to the female receptacle on the appliance, orient the male plug so that it mates with the female receptacle. The male plug can only be inserted one way. If the male plug will not go into the receptacle on the appliance, rotate the male plug 180°
IMPORTANT: Should the male plug become detached from the appliance during use, it is important to:
1.Unplug the power cord from the wall outlet.
2.Turn off the appliance at the control panel.
3.
4.
5.Turn the appliance back on.
2
7
