BR7160_BCG300 Book AUST.qxp 21/9/05 3:52 PM Page 8
Handy hints
Care and cleaning
•For best coffee flavour, store coffee beans in an airtight container.
•Grind coffee beans immediately before brewing.
•Grinding times will vary by amount and fineness setting.
•To ensure optimal grinding performance, allow your Coffee and Spice Grinder to cool for at least one minute between uses.
•Coffee flavour and strength is a personal preference. Vary the type of coffee beans, amount of coffee and fineness of grind to find the flavour you prefer.
•To grind amounts not on controls, select the next closest amount listed.
•The BarVista Coffee and Spice Grinder will not grind anything that is sticky or extremely hard ie. chocolate, whole nutmeg, candied fruits etc.
•The BarVista Coffee and Spice Grinder will not make pastes of any fruits, seeds, nuts or fresh or herbs ie. curry pastes, nut batters.
•The BarVista is not recommended for chopping garlic, parmesan cheese and nuts.
•To grind dry seeds, dry spices or dry herbs, place one to four tablespoons of dry food in the removable bowl. Select desired fineness of grind and position the cup slider control according to the level indicated in the removable bowl i.e. 2 cups – 12 cups. If unsure of fineness of grind, start with the coarse setting, and repeat as necessary to achieve the desired fineness of grind. Press START button to start grinder. When desired ground size is reached, press START to stop grinder.
Do not immerse motor base or cord in water or any other liquid. Do not fill the stainless steel grinding base with water or any other liquid.
1.Always switch the power off at the power outlet and then remove the plug from the power outlet before cleaning the Coffee and Spice Grinder.
2.Remove transparent cover by turning counter- clockwise to unlock position, lift straight up.
3.Remove the grinding bowl by turning counter- clockwise until it comes loose from the base. Lift removable bowl straight up out of base.
4.The removable bowl and lid can be washed in hot soapy water, rinsed and dry thoroughly.
5.Wipe base with a damp cloth. Wipe exterior of unit with slightly damp cloth. Polish with a soft, dry cloth. Do not use abrasives.
6.Hold grinder and turn the base clockwise to rewind cord.
Storage
Always switch off at the power outlet, remove the plug from outlet. Follow directions for cleaning and store in an upright position on a flat surface on your bench top or in an accessible cupboard.
8
9
