10
OPERATING yOUR BREvILLE TOAST & MELT
Your sandwich press features an Adjustable
Height Control feature which allows you
to fix the top plate to a range of positions
above the bottom plate. This allows your
sandwich press to be used as an open
toaster ideal for toasting open sandwich
melts. It can also be used for toasting
sandwiches where you don’t need to apply
the weight of the top plate.
OPEN SANdWICH MELTS
1. Allow the sandwich press to pre-heat
until the green ‘READY’ light illuminates.
2. Place sandwich to be melted on
bottom plate.
3. Move the Adjustable Height Control clip
on the right hand side of the sandwich
press to the desired height (see Fig 2).
4. Slowly lower the top plate until it rests
on the Adjustable Height Control clip.
5. The top plate will radiate the desired
heat to melt ingredients such as cheese.
6. Toasting melts should take
approximately 3-4 minutes. However
exact toasting time will be a matter of
taste. It will also depend on the height of
the top plate.
Fig. 2
Adjustable Height Control
Toasts or melts any bread
thickness in minutes.
Fig. 3
NOTE
The Adjustable Height Control can be
moved to accommodate thick or thin
melts by sliding the clip forwards or
backwards along the arm.