CleanShot™ 2050 PSI Pressure Washer

HOW TO USE YOUR PRESSURE WASHER

If you have any problems operating your pressure washer, please call the pressure washer helpline at 1-800-743-4115.

Pressure Washer Location

Pressure Washer Clearance

WARNING

Running engine gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

•Operate pressure washer ONLY outdoors.

•Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

•DO NOT operate pressure washer inside any building or enclosure.

The pressure washer must be at least 5 ft. (152 cm) from structures having combustible walls and/or other combustible materials. Leave at least 3 ft. (92 cm) all around pressure washer including overhead, for adequate cooling, maintenance and servicing.

Place pressure washer in a well ventilated area, which will allow for removal of deadly exhaust gas. DO NOT place pressure washer where exhaust gas could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes or other openings that can allow exhaust gas to collect in a confined area (Figure 7). Prevailing winds and air currents should be taken into consideration when positioning pressure washer.

Figure 7 — Pressure Washer Clearance

Typical Pressure

Washer Shown

Exhaust Port

How to Start Your Pressure Washer

To start your pressure washer for the first time, follow these instructions step-by-step.This starting information also applies if you have let the pressure washer sit idle for at least a day.

1.Place pressure washer near an outside water source capable of supplying water at a flow rate greater than 2.9 gallons per minute and no less than 20 PSI at pressure washer end of garden hose.

2.Check that high pressure hose is tightly connected to spray gun and pump. See “Preparing Pressure Washer for Use” for illustrations.

3.Make sure unit is in a level position.

4.Connect garden hose to water inlet on pressure washer pump. Turn ON water.

CAUTION

DO NOT run the pump without the water supply connected and turned on.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

5.Attach adjustable nozzle extension to spray gun (Figure 8).Tighten by hand.

Figure 8 — Connect Nozzle Extension to Spray Gun

6.Position nozzle in low pressure mode (see “How to Use the Adjustable Nozzle”) and squeeze trigger on spray gun to relieve air pressure caused by turning ON water.Water will flow out of spray gun in a thin stream. Continue to hold trigger until there is a steady stream of water and no air remains in system.This will make it easier to pull start engine. Release trigger.

7.Engage trigger lock on spray gun trigger (Figure 9).

Figure 9 — Spray Gun with Trigger Lock Engaged

Trigger Lock

8

Page 7 Page 9
Page 8
Image 8
Briggs & Stratton 020244-0 HOW to USE Your Pressure Washer, Pressure Washer Location, How to Start Your Pressure Washer
Page 7 Page 9

020244-0 specifications

The Briggs & Stratton 020244-0 is a powerful and versatile engine widely recognized in the small engine market. Known for its reliability and robust performance, this engine is a favored choice for various applications, including lawn mowers, generators, and other outdoor power equipment.

One of the key features of the Briggs & Stratton 020244-0 is its compact design, which allows for easy installation in different types of machinery. This engine is built with durability in mind, featuring a cast iron cylinder sleeve that contributes to its longevity and resistance to wear. The aluminum alloy construction not only keeps the weight down but also enhances heat dissipation, ensuring the engine operates efficiently even during prolonged use.

The engine comes equipped with the latest overhead valve (OHV) technology, which improves fuel efficiency and provides better torque. The OHV design allows the engine to breathe better, resulting in smoother operation and lower emissions. This is particularly advantageous for eco-conscious consumers looking to reduce their carbon footprint.

Another notable characteristic of the 020244-0 is its easy starting mechanism. It features a recoil start system that is simple and reliable, ensuring users can get their equipment running with minimal effort. Additionally, the engine is designed with a quiet operation in mind, making it suitable for residential areas where noise levels may be a concern.

Maintenance is made simple with the Briggs & Stratton 020244-0. It has accessible air and oil filters, allowing users to perform routine checks and services without the hassle of complicated disassembly. The engine also features an integrated fuel shut-off valve, which helps in the prevention of fuel leaks and enhances safety during storage.

Overall, the Briggs & Stratton 020244-0 combines innovative technology, ease of use, and a commitment to durability. Whether you are a homeowner tending to your lawn or a professional in the landscaping business, this engine provides the reliability and performance necessary to get the job done effectively. The blend of features and specifications makes the 020244-0 a staple choice in the small engine category, ensuring it continues to serve users for many years.
Top Page Image Contents