Briggs & Stratton 1695354 manual Install Components

Assembly

Install Components	INSTALL LOWER CHUTE ROD AND PIN TO BOOT
INSTALL MOUNTING PLATE	1. Insert the head of pin (A, Figure 8) through front
	hole of lower chute (D). Secure with 1/4-20 x 5/8
1. Install mounting plate (A, Figure 7) to mower deck
	carriage bolt (B) and 1/4-20 lock nut (C) as
as shown. Secure with 5/16-18 x 5/8 carriage	shown.
bolts (C) and 5/16-18 locknuts (A).	2. Install the rod (H) to lower chute (D) using 5/16-18
	x 1 capscrew (J) and 5/16-18 locknut (G) for front
	holes. Use 5/16-18 x 1-1/4 capscrew (I) and 5/16-
	18 locknut (G) as shown. Tighten hardware.

	3. Install the rubber strap (F) onto capscrew (I)
	securing with 5/16-18 locknut as shown.
A	C	C	B
B			A
	D
			E
			F
			G
Figure 7.	Install Mounting Plate		G
A. Mounting Plate
B. Locknuts, 5/16-18
C. Carriage Bolts, 5/16-18 x 5/8			H
	J		I

Figure 8. Install Lower Chute and Pin to Boot

A. Pin, Latch

B. Carriage Bolt, 1/4-20 x 5/8

C. Locknut, 1/4-20

D. Lower Chute

E. Locknut, Center Lock, 5/16-18

F. Strap, Rubber

G. Locknuts, Whiz Lock, 5/16-18

H. Rod, Boot Mount

I. Capscrew, Hex Head, 5/16-18 x 1-1/4

J. Capscrew, Hex Head, Thin, 5/16-18 x 1

8