Briggs & Stratton 20216 owner manual How to Use the Adjustable Nozzle, Using the Turbo Nozzle

Models: 20216

1 36
Download 36 pages 46.35 Kb
Page 9
Image 9
How to Use the Adjustable Nozzle

2600 PSI Pressure Washer

How to Use the Adjustable Nozzle

Figure 11 — Adjusting the Nozzle for Spray Pattern

You should now know how to START and STOP your pressure washer.The information in this section will tell you how to adjust the spray pattern and to apply detergent or other cleaning chemicals.

Using the Turbo Nozzle CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

NEVER adjust spray pattern when spraying.

NEVER put hands in front of nozzle to adjust spray pattern.

1.Slide nozzle forward when you wish to adjust spray to low pressure mode (Figure 9). Slide nozzle backward to achieve high pressure.

Figure 9 — Adjusting Nozzle for Pressure

Slide nozzle backward

Slide nozzle forward for low

for High Pressure

pressure mode and

Mode

detergent application

2.Point nozzle down towards a firm surface and press trigger to test pattern (Figure 10).

Figure 10 — Testing the Spray Pattern

Rotate nozzle

Rotate nozzle clockwise

counterclockwise for fan

for narrow spray pattern

spray pattern

 

4.For most effective cleaning, keep spray nozzle from 8 to 24 inches away from cleaning surface.

5.If you get spray nozzle too close, especially using high pressure mode, you may damage surface being cleaned.

6.DO NOT get closer than 6 inches when cleaning tires.

Using the Turbo Nozzle

The turbo nozzle rotates the high pressure stream in a rapid circular pattern.The high pressure spray is most effective when the tip of the nozzle extension is held between 8 to 24 inches from the surface being cleaned.

CAUTION

The turbo nozzle produces an extremely high pressure spray which is capable of removing paint and cutting holes through surfaces if held too close.

Always make sure the surface you will clean will not be damaged by the high pressure spray by testing in a hidden area.

To attach the turbo nozzle to the spray gun:

1.Engage safety latch to spray gun trigger.

2.Remove the nozzle extension from the spray gun, if attached.

3.Attach the turbo nozzle extension to spray gun (Figure 12).Tighten by hand.

Figure 12 — Connect Turbo Nozzle Extension to Spray Gun

3.Twisting nozzle adjusts spray pattern from a narrow pattern to a fan pattern (Figure 11).

9

Page 9
Image 9
Briggs & Stratton 20216 owner manual How to Use the Adjustable Nozzle, Using the Turbo Nozzle, PSI Pressure Washer