23.Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision.

24.To reduce fire hazard, keep unit free of grass, leaves & excess oil. Do not stop or park over dry leaves, grass or combustible materials.

25.The engine in this unit is not factory equipped with a spark arrester. It is a violation of California Public Resource Code Section 4442 to use or operate the engine on or near any forest-covered, brush-covered, or grass-covered land unless the exhaust system is equipped with a spark arrester meeting any applicable local or state laws. Other states or federal area may have similar laws.

26.OSHA regulations may require the use of hearing protection when exposed to sound levels greater than 85 dBA for an 8 hour time period.

CAUTION

This machine produces sound levels in excess of 85 dBA at the operator’s ear and can cause hearing loss

though extended periods of exposure.

Wear hearing protection when operating this machine.

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not drive on it.

WARNING

Do not use this machine on slopes greater than 15°.*

Select slow ground speed before driving onto slope. Use extra caution when operating on slopes with rear-mounted grass catchers.

Mow across the face of slopes, not up and down, use caution when changing directions and DO NOT START OR STOP ON SLOPE.

Do

1.Mow across slopes, not up and down.

2.Remove obstacles such as rocks, tree limbs, etc.

3.Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles.

4.Use slow speed. Choose a slow speed so that you will not have to stop or change speed while on the slope.

5.Use extra care with grass catchers or other attachments. These can change the stability of the unit.

6.Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

7.See your authorized dealer for recommendations of available weights to improve stability.

*This limit was determined per CEN Standard EN 836:1997, Section

5.2.2and is based on the EN 836 Stability Test procedure described in Section 4.2.4.2. The 15 degree “limit of stability” is equal to 50% of the angle at which machine lift-off occurred in static tests. Actual dynamic stability may vary depending on operating conditions.

 

 

Operator Safety

 

 

 

 

 

 

Do Not

 

1.

Avoid starting, stopping, or turning on a slope. If

Safety

 

tires lose traction (i.e. machine stops forward

 

motion on a slope), disengage the blade(s) (PTO)

 

 

and drive slow off the slope.

 

2.

Do not turn on slopes unless necessary, and then,

 

 

turn slowly and gradually uphill, if possible. Never

 

 

mow down slopes.

 

3.

Do not mow near drop-offs, ditches, or

 

 

embankments. The operator could lose footing or

 

 

balance or mower could suddenly turn over if a

 

 

wheel is over the edge of a cliff or ditch, or if an

 

 

edge caves in.

 

4.

Do not mow on wet grass. Reduced footing or

 

 

traction could cause sliding.

 

5.

Do not try to stabilize the unit by putting your foot

 

 

on the ground. (ride-on units)

 

6.

Do not mow excessively steep slopes.

 

7.

Do not use grass catcher on steep slopes.

 

8.

Do not mow slopes if you cannot back up them.

 

TOWED EQUIPMENT (RIDE-ON UNITS)

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturer’s recommendations for weight limit for towed equipment and towing on slopes. See attaching a trailer under OPERATION.

3.Never allow children or others in or on towed equipment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Travel slowly and allow extra distance to stop.

6.Do not shift to neutral and coast down hill.

CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that children will remain where you last saw them.

1.Keep children out of the mowing area and under the watchful care of another responsible adult.

2.Be alert and turn unit off if children enter the area.

3.Before and during reverse operation, look behind and down for small children.

4.Never carry children, even with the blade(s) off. They may fall off and be seriously injured or interfere with safe unit operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

5.Never allow children to operate the unit.

6.Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

EMISSIONS

1.Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm.

2.Look for the relevant Emissions Durability Period and Air Index information on the engine emissions label.

7

Page 9
Image 9
Briggs & Stratton 5900611, 5901186, 5901183 Slope Operation, Towed Equipment RIDE-ON Units, Children, Emissions, Do Not

5900612, 5900613, 5900611, 5900716, 5900752 specifications

Briggs & Stratton is a leading manufacturer of small engines, known for their reliability and performance in a variety of applications. Among their extensive range of products, the model numbers 5900752, 5901184, 5900753, 5900611, and 5900613 represent a collection of essential components designed to enhance engine efficiency and user experience.

The Briggs & Stratton 5900752 is recognized for its high-quality air filter. This filter is engineered to trap dust and dirt effectively, ensuring that only clean air enters the engine. A clean air intake is crucial for optimal performance and longevity of the engine, as it prevents wear and tear on internal components. Its design allows for easy installation and maintenance, making it user-friendly for homeowners and professionals alike.

The 5901184 is a fuel tank assembly designed for enhanced durability and a consistent fuel supply. This component is vital for maintaining stable engine performance, minimizing fuel leakage, and ensuring the integrity of the engine system. The material used in its construction is resistant to corrosion, which is critical for longevity, especially in outdoor equipment exposed to various environmental conditions.

The 5900753 represents a high-performance carburetor that plays a significant role in the mixture of air and fuel. Its precision-engineered design allows for efficient combustion, resulting in robust engine performance. This carburetor is built to handle fluctuations in load, ensuring that the engine runs smoothly under different operating conditions.

The Briggs & Stratton 5900611 and 5900613 series are vital components known for their ignition systems. These components contribute to reliable spark generation, which is essential for engine starting and operation. The enhanced ignition efficiency not only boosts engine starts but also promotes fuel efficiency and reduces emissions, aligning with the growing demand for environmentally conscious products.

Overall, the features and technologies present in the Briggs & Stratton 5900752, 5901184, 5900753, 5900611, and 5900613 highlight the company’s commitment to quality, performance, and user-centered design. With a focus on reliability and ease of use, these components are engineered to meet the needs of various applications, from residential lawn care to commercial landscaping. As part of Briggs & Stratton's extensive catalog, these components are essential for maintaining optimal engine performance and ensuring a seamless user experience in the field.