KNOW how to stop the log splitter and disengage the controls before operating it.

NEVER place hands or feet between the log and splitting wedge during forward or reverse stroke. Serious injury or death could result.

NEVER straddle or step over the log splitter during operation.

NEVER reach or bend over the log splitter to pick up a log.

NEVER try to split two logs on top of each other.

NEVER try to cross split a second log.

NEVER allow one person to operate the valve while another is positioning the log.

NEVER attempt to load your log splitter when the ram or wedge is in motion.

ALWAYS use your hand to operate the control lever on the valve. NEVER use your foot, a rope or any extension device.

NEVER move the log splitter while the engine is running. Shut off the engine even if you are leaving the log splitter for a short period of time.

ALWAYS avoid contact with the muffler and other hot areas of the engine during operation to prevent burns.

REPAIR AND MAINTENANCE SAFETY

NEVER operate your log splitter when it is in poor mechanical condition or in need of repair. Periodically check that all nuts, bolts, screws, hydraulic fittings and hose clamps are tightened.

NEVER alter your log splitter in any manner such as adding a rope or extenstion to the control lever or adding to the width or height of the wedge. Such alterations may cause your log splitter to be unsafe and will void the warranty.

Perform all recommended maintenance procedures before using your log splitter.

Replace all damaged or worn parts immediately.

NEVER tamper with the engine to run it at excessive speeds. The maximum engine speed is preset by the manufacturer and is within safety limits.

ALWAYS remove the spark plug wire before performing any service or repair on your log splitter. ALWAYS check the level of hydraulic oil and engine oil before operation.

ALL replacement parts must meet manufacturer’s specifications.

Page 4

Page 5 Page 7
Page 6
Image 6
Briggs & Stratton LS401221, LS401216, LS401213, LS401224 owner manual Repair and Maintenance Safety
Page 5 Page 7

LS401213, LS401224, LS401216, LS401221, LS401216, LS401213, LS401224 specifications

Briggs & Stratton has long been a leader in the field of small engine technology, and their latest offerings—LS401216, LS401224, LS401213, and LS401221—are no exception. These models represent a perfect blend of performance, efficiency, and durability, making them ideal solutions for various applications, including lawn care and outdoor equipment.

The LS401216, LS401224, LS401213, and LS401221 are powered by advanced OHV (Overhead Valve) technology, which enhances fuel efficiency and overall engine performance. This design helps to optimize airflow and combustion, resulting in lower emissions and reduced fuel consumption. Consequently, users benefit from longer run times and improved energy efficiency, making these models both eco-friendly and cost-effective.

Each engine model is designed with a robust construction that ensures longevity and reliability. The high-quality materials used in their construction provide excellent resistance to wear and tear, making them suitable for demanding environments. Additionally, the engines feature a lightweight design, making them easy to maneuver and install, without compromising on power.

One of the standout features across these models is the quick-start technology, allowing for easy ignition regardless of temperature or environmental conditions. Users can enjoy hassle-free starts with just a simple pull, enhancing productivity during operation. Furthermore, the integrated air filtration systems enhance engine performance by preventing dirt and debris from entering, which can prolong the engine's lifespan.

The LS401216, LS401224, LS401213, and LS401221 engines also feature customizable options, allowing users to select the horsepower and torque suitable for their specific needs. This versatility ensures that they can be used across a variety of applications, from pushing mowers to pressure washers, making them a popular choice among homeowners and professionals alike.

In addition to performance attributes, these engines are engineered for user comfort and convenience. Features such as vibration dampening and ergonomic designs make operation more comfortable, reducing fatigue during prolonged use. Maintenance is also straightforward, with easy-access components making routine checks and service a breeze.

In summary, the Briggs & Stratton LS401216, LS401224, LS401213, and LS401221 are powerful, efficient, and durable engines catering to diverse outdoor needs. With advanced technology, robust construction, and user-friendly features, these engines exemplify the commitment of Briggs & Stratton to innovation and performance in the small engine sector. Whether for commercial or residential use, these models stand as reliable workhorses in the industry.
Top Page Image Contents