Installation Instructions
S200X Suspension Seat Kit Part No. 5600136
For Snapper Pro S200X Models (5900664 & 5900692)
Kit Contents:
Part No. | Qty. | Description |
5101214 | 1 | Suspension Seat |
5401044D | 1 | Extension, Seat Belt |
5403471D | 1 | Plate, Seat Support |
5101123 | 1 | Sleeve Buckle, Seat Belt |
5025010X6 | 1 | Bolt, |
5025391 | 1 | Nut, |
5025154 | 1 | Washer,1/4 SAE |
WARNING
Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, and disconnect the spark plug wire(s).
A
A
Figure 1. Remove The Existing Seat
A.5/16-18 Nylock Flange Nuts
B.Seat Plate
Installing The Suspension Seat
1.Park machine on a flat, level surface and engage the parking brake. Disengage the PTO switch, turn off the engine and remove the key from the ignition.
2.Raise the seat plate (B, Figure 1) to gain access to the four (4)
3.Remove the four (4)
(4)
4.Using the 1/4 hardware secure (B, C & D, Figure 2) the seat support plate (A) to the seat plate.
5.See Figure 3. Install the new suspension seat onto the seat plate and secure using the four (4)
Installing The New Seat Belt Components
6.See Figure 4. On the right hand side of the machine, replace the existing seat sleeve buckle with the new seat sleeve buckle. Replace the existing seat belt extension plate with new seat belt extension plate.
A |
|
| B |
| C |
| D |
Left Side View of | |
Seat Plate | D |
| |
B | C |
| A |
Figure 2. Install the Seat Support Plate
A. Seat Support Plate
B. 1/4-20 X 3/4 Bolt
C. 1/4 SAE Washer
D. 1/4-20 Hex Nylock Flange Nut
Briggs & Stratton Yard Power Products Group | 1 | 5403602 |
| ||
Copyright © 2007 Briggs & Stratton Corporation | Rev. 8/2007 | |
Milwaukee, WI, USA. All Rights Reserved. | ||
| TP |
