Note: With the help of a friend, turn the cart over, try to minimize the stress to the side panels.

Step 3

Attach locking casters to the bottom of the cart. Tighten caster bolts securely using hex nut wrench provided in parts pack.

Note: With the help of a friend, turn the cart to its upright position.

Step 4

Attach back cart panel by using six M6 X 60mm bolts.

Note: Leave bolts hand tight until Step 9.

Locking caster

Hex Nut Wrench

21

Page 22
Image 22
Brinkmann 2610 Series owner manual Attach back cart panel by using six M6 X 60mm bolts