Heat Shield Plate Tank | Brinkmann 6355-T instruction

Step 8

Attach tank heat shield to heat shield plate using one

#8 self-tapping screw.

Step 9

Attach heat shield plate to the front legs of cart frame assembly using four M6 X 12mm bolts and star washers .

Step 10

Attach heat shield plate to back panel using three #8 self-tapping screws.

Heat Shield

Plate

Tank

Heat Shield

Heat Shield Plate

Heat Shield Plate

25

Image 26

Brinkmann 6355-T owner manual Heat Shield Plate Tank

Contents

Model 6355-T Important Safety Table of Contents General Warnings Installation Information LP GAS Cylinder not Supplied with this Grill Cylinder Specifications Filling the LP GAS Cylinder Installing the LP GAS Cylinder Onto the GrillRegulator Resetting Procedure Hose and Regulator Connecting Hose and Regulator to AN LP GAS Cylinder Connecting Hose and Regulator Checking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Main Burners Lighting InstructionsLighting the Main Burners Turning OFF the Grill Lighting the Side BurnerMatch Lighting the Side Burner Preheating the Grill Operating the GrillBreaking in Your Grill Controlling FLARE-UPS Rotisserie Cooking Side Burner Helpful Hints CleanlinessGrilling to Proper Temperature Cleaning and Maintenance Burner ASSEMBLY/MAINTENANCE Transporting and Storage Cooking GrillsHeat Distribution Plates Before Storing Your Grill Trouble Shooting Frequently Asked Questions Frequently Asked Questions Parts BAG Contents Assembly Instructions For Missing PARTS, Please Call Customer Service AT Step Tire Hubcap Wheel axle Bolt Leg Washer Heat Shield Plate Tank Grill Body Assembly Spring Pin Lower Pivot Step Hose Place the side burner grate onto the side burner table Place the heat distribution plates ProSeries 6355-T Assembled Accessories 331-800-468-5252 Page Warranty