Warming Rack
Cooking Grills
Heat Distribution
Plates
Grooves
Battery |
Igniter Cap |
Step 23
Place the heat distribution plates on lower level of grill body assembly directly above burners.
Step 24
Place cooking grills on support ribs directly above heat distribution plates.
Step 25
Place warming rack in grooves so that it sits above the cooking grills.
Step 26
Igniter battery holder is located under side table front panel. Remove igniter cap and insert battery with positive end of battery toward igniter cap. Ensure spring is in place inside igniter cap. Replace igniter cap and make sure the igniter is working properly.
30
