Brinkmann 7341 owner manual Without leak testing all

		Step 17
		Remove two M4 bolts and spring
Side		washers from the side burner valve.
		Insert the side burner valve
Burner
		assembly through the hole in the
Valve
	Burner Venturi	side burner front panel, then firmly
		seat the valve nozzle into the
		burner venturi. Hold in place while
		you perform Step 18.
		WARNING: Never use your grill
Valve		without leak testing all
		gas connections and
Nozzle
		hoses. See the section
		on "Leak Testing" in
		this manual for proper
Side		procedures.
Burner
Control
Knob
	Bezel	Step 18
		Place the bezel over the control
		knob mounting stem and position
		over holes in side burner base and
		side burner valve assembly. Attach
		with two M4 X 10mm bolts with
		spring washers which come with
		valve. Then install the side burner
		control knob onto valve stem.
Side Burner		Step 19
Igniter Lead		Attach side burner igniter lead wire
	Electrode	to the electrode as illustrated.
		Step 20
		Attach side burner electronic source
Side Burner		wire to the side burner valve
		electrode as illustrated.
Electronic	Side
Lead
	Burner
	Electrode
		28