INS_800-1620-0_BlueMaxRech.qxd 10/14/05 10:50 AM Page 3

OPERATING INSTRUCTIONS

READ AND FOLLOW ALL SAFETY WARNINGS AND INSTRUCTIONS IN THE OWNER’S MANUAL BEFORE OPERATING SPOTLIGHT.

Inspect contents of the box to ensure all parts are included and undamaged.

1

3

2

4

Step 1: Follow charging instructions on page 3 of this manual and allow battery to fully charge.

Step 2: Depress trigger switch in handle to turn spotlight ON. Release trigger switch to turn spotlight OFF.

Step 3: To lock trigger switch to ON, depress trigger switch and slide down lock button on side of handle. To unlock and turn spotlight OFF, depress trigger and slide lock button up.

WARNING: Never place spotlight face down when light is on or is still hot from recent use. Doing so could burn/ignite surfaces such as seats, carpeting, etc. and cause major property damage. Always turn spotlight off when not in use.

The life expectancy of the battery is approximately 500 cycles, at which time a replacement battery is recommended. A replacement battery may be purchased from The Brinkmann Corporation Customer Service Department by calling 800-468-5252.

Do not allow battery to completely discharge. A dim light indicates a low battery. Turn OFF and UNLOCK spotlight and recharge battery as soon as possible.

Part List:

1Q-Beam Blue Max Rechargeable Spotlight

2Rechargeable Battery

312-volt DC Charger/Adapter

4120-volt AC Charger

Owner’s Manual

To Operate

IMPORTANT:

Unlock and turn spotlight OFF before charging from AC or DC outlet. The battery cannot charge if the spotlight is ON. Leaving spotlight ON during charging may cause damage to battery and AC charger.

12-volt DC charger/adapter operates from a cigarette lighter receptacle for charging battery in spotlight or continuous corded operation with or without battery.

NOTE: To prevent car battery from completely discharging, it is recommended that car engine remain running while in use.

Lock Button

Trigger

Switch

2

Page 3
Image 3
Brinkmann 800-1620-0 operating instructions Operating Instructions, To Operate