TROUBLE SHOOTING
Problem: | Possible Causes: |
Burner will not light
Fire at control knob
1.Check LP cylinder fuel level.
2.Bad electrode spark.
Check to see if the grill will match light. Electrode or collector may need adjustment.
3.Burner may not be properly seated.
4.Burner may be obstructed.
5.The cylinder valve may be closed.
6.Regulator is not properly seated on cylinder valve.
1.Burner holes may be obstructed. See section on
"Burner Assembly/Maintenance" under Proper Care and Maintenance.
2.Burner is improperly seated on control valve.
3.Gas connections may be loose.
Leak Check and tighten all connections.
| 1. | Burner | is obstructed. | See section | on |
|
| |
Yellow | Flames at burner | "Burner | Assembly/Maintenance" | under | Proper | Care | ||
|
| and | Maintenance. |
|
|
|
| |
| 1. | Burner | holes may be | obstructed. | See | section | on | |
|
| "Burner | Assembly/Maintenance" | under | Proper | Care | ||
Flame | blows out on "LOW" | and | Maintenance. |
|
|
|
| |
| 2. | Grill | is | not sufficiently | preheated. |
|
|
|
| 3. | Burner | is improperly | seated on control | valve. |
| ||
Burner does not get hot enough
Grill is Too Hot
1.Flow control device has been activated in regulator. See Regulator Resetting Procedure under Connecting LP Cylinder and Hose/Regulator to Grill.
1.Excess grease
2.Damaged or faulty regulator.
Replace with factory authorized parts.
3.Cook on a lower temperature setting.
t7
