ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR COOKER.
Inspect contents of the box to ensure all parts are included and undamaged.
FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-527-0717.
(Proof of purchase will be required.)
Tools required to assemble your cooker:
2 Adjustable wrenches
OR
Adjustable wrench and the following wrenches:
•d" Open end wrench
•w" Open end wrench
•f" Open end wrench
PARTS LIST:
1Owner’s Manual
1Cooker Stand
1Burner Assembly
1Hose & Regulator with Safety Tag
POL Fitting | Female |
SAE | |
| Fitting |
Air Hole
Rotating
Air Shutter
NOTE: Make sure the male SAE fitting on the cooker is screwed into the air shutter and tightened securely. Do not
All Purpose | Turkey Fryer |
Gas Cooker | |
| Gas Cooker |
Step 1
Remove nut from bottom of burner assembly.
Step 2
Position the stand upside down as shown.
Step 3
Place burner assembly inside stand with threaded bolt protruding through support strap as shown.
Step 4
Thread nut onto bolt and securely tighten. Do not overtighten.
Step 5
Set cooker with burner assembly upright on flat surface. Make sure burner assembly is securely attached to cooker.
Step 6
Attach female SAE fitting on hose assembly (using w" wrench) to the male SAE fitting on the burner (using d" wrench). Hold the male SAE fitting securely with one wrench and turn the female fitting with the other wrench until they are tightly joined.
PROCEED TO “GAS LEAK TESTING” SECTION ON PAGE 4.
3
