Brinkmann 8445 owner manual Without leak testing all

	Step 12
	Attach side burner to right side of
	cart frame assembly. Insert two
	M6 X 12mm bolts (black) into both
	right legs halfway. Place side
	burner over bolts and slide toward
	back of grill, then tighten securely.
	Fasten side burner front panel to
	grill body with one M6 X 12mm bolt
	(black).
Burner Venturi
Assembly
Bracket
	Step 13
	Attach hose heat shield using two
	#8 self-tapping screws.
Hose Heat	Step 14
Shield	Loosen the two M4 bolts with
	washers from the bottom of the
	burner assembly bracket. This
	will allow the burner to move
	freely while performing Step 15.
	Step 15
	Remove two M4 bolts and
	washers from the side burner
Side Burner	valve. Insert the side burner
	valve assembly through the hole
Valve
	in the side burner front panel,
	seat the valve nozzle into the
Burner Venturi	burner venturi. Hold in place
	while you perform Step 16.
	Warning: Never use your grill
	without leak testing all
	gas connections and
Valve Nozzle	hoses. See the section
	on "Leak Testing" in this
	manual for proper
	procedures.
	28