Step 6
Install smokestack inside smokestack pilot as illustrated. Tighten smokestack screw with 9⁄16" wrench.
Step 7
To install air vent damper, open the firebox door and attach damper to inside of firebox door as illustrated. Do not overtighten as this will make the air vent difficult to open and close.
NOTE: Make sure air vent damper handle faces outside of the firebox door.
Step 8
Attach the door latch to the outside of the firebox door as illustrated. Do not overtighten hex nut.
Step 9
Attach front shelf and side handle to smoker.
CAUTION: A metal bucket must be kept under grease hole at all times. Empty or replace bucket when w full to prevent spills during removal. Use caution when removing to avoid spilling hot grease.
Metal Bucket (not included)
Grease
Hole
Step 10
Remove nut from temperature gauge hole in smoker. Remove tightening ring from gauge. Screw probe into temperature gauge hole in smoker. DO NOT OVERTIGHTEN!
Temperature
Gauge 
Temperature
Gauge Hole
Smokestack
Smokestack
Pilot
Smokestack
Screw
Butterfly
Damper
Front Shelf
Side
Handle
5
