Brinkmann Pro Series 2500 owner manual Spring Pin Lower Pivot Screw Holes

Spring Pin

Lower Pivot

Screw Holes

Step 10

Insert right side door over lower pivot (on bottom cart panel) then align door with cart frame. Depress spring pin located on top edge of door and slide door toward side cart panel until spring pin locks into hole in door bracket. Repeat for other door.

Step 11

Attach side burner assembly to grill body assembly by inserting four

M6 X 20mm bolts halfway into the screw holes of the grill body assembly. Then slide side burner assembly onto bolts and secure all four bolts. Install side burner grate and control knob.

Side burner grate

		MAXIMUM SIDE BURNER LOAD = 15 lbs.
SIDE BURNER LIGHTING INSTRUCTIONS:		6. If burner does NOT ignite immediately, turn control knob to
1.	Read and follow all warnings and instructions
		OFF, wait 5 minutes to allow gas to dissipate and repeat
	in owner’s manual before lighting.	lighting procedure.
2.	Open lid before lighting side burner.	7. Refer to owner’s manual for match lighting procedure.
3.	Make sure all control knobs are in the OFF position.	8. For assistance, call 1-800-527-0717.
4.	Push and turn side burner control knob of that burner to HIGH.	9. To turn off, turn control knob clockwise until it
5.	Press the electronic igniter and hold for 3-5 seconds	locks in OFF position.
	to light burner.

24