NOTE: With the help of a friend, turn the cart to its upright position.
Step 4
Place tank tray assembly over vent holes in bottom cart panel and secure using four M6 X 15mm bolts. Tank tray should slide in and out of cart freely.
Step 5
Install door bracket using four
M6 X 50mm bolts. Make sure the door stop is set toward back of cart. (Hand tighten only at this point.)
Tank Tray Assembly
Center
Cylinder Clamps
Step 6
Attach the grease cup bracket onto the back panel by inserting the three tabs into the slots on the back cart panel.
25
