Step 13
Remove two M4 X 10mm bolts and spring washers from the side burner valve. Insert the side burner valve stem through the hole in the side burner table base, then firmly seat the valve nozzle into the burner venturi. Hold in place while you perform Step 14.
Warning: Never use your grill without leak testing all gas connections and hoses. See the section on "Leak Testing" in this manual for proper procedures.
Step 14
Place the bezel over the valve stem and position over holes in side burner base and side burner valve assembly. Attach with two
M4 X 10mm bolts with spring washers which come with valve. Then install the side burner control knob onto valve stem.
Step 15
Attach side burner igniter lead to the electrode as illustrated.
Burner Venturi |
Side |
Burner |
Valve |
Valve |
Nozzle |
Side Burner Igniter
Lead
Electrode
28
