Rear-Facing Installation

1Loosen the harness.

a Lift harness adjuster lever

bPull both harness straps forward

2 Remove the body pillow, unbuckle the harness, and remove the belly pad.

3Pull the head pad up, then pull the cover forward while pulling the buckle through to access the rear-facing belt path.

4Route the vehicle seat belt through the rear-facing belt slots, then buckle. Ensure the vehicle belt is not twisted.

5Push the child seat down while pulling the vehicle belt to remove all slack (see pages 10 11).

6Rear-facing installations can be improved by the use of the Versa-Tether (see pages 24 27).

7Pull the buckle up through its appropriate slot in the cover.

8Replace the cover and belly pad.

38

1b

1a

3

4

5

Page 40
Image 40
Britax 70 manual Replace the cover and belly pad