P2219_R02f.qxd 11/7/2002 10:23 AM Page 20

UsingRestraintFeatures

Recline Bar

THE RECLINE BAR MUST BE INSTALLED BEFORE USING THIS RESTRAINT.

Insert recline bar into the holes in lower rear of restraint prior to installation in vehicle (Fig. A).

IMPORTANT: The bottom of the restraint must be flat on the vehicle seat when A installed.

Using the Chest Clip

Open the chest clip by squeezing the middle tab, then pull the two pieces apart (Fig. C).

IMPORTANT: The correct height for the chest clip is at the middle of the chest, level with the armpit.

C

18

UsingRestraintFeatures

Using the Buckle

Fastening the Buckle

1Hold the buckle with one hand.

2Use your other hand to insert one tongue at a time into the buckle. Proper connection is confirmed with a positive click, after inserting the second buckle

tongue (Fig. B).

B

Releasing the Buckle

1Brace the rear of the buckle with hand.

2Use thumb to press release button until tongues are ejected from buckle (Fig. B).

NOTE: Periodically clean the buckle to ensure proper operation. See

page 27.

19