CONNECT DUCTWORK
1.Use (2) screws (4,8x38mm) and drywall anchors to secure flue mounting bracket to the ceiling or wall as shown.
2.Use 8" round metal duct to connect the discharge collar on the hood to the ductwork above.
3.Use duct tape to make all joints secure and air tight.
4.Connect the upper flue to the bracket with mounting screws (3,9x9,5mm).
5.Slide the lower flue downward, until it fits properly around hood.
6.Secure lower flue to hood with mounting screws (3,9x9,5mm).
FASTEN FLUE TO HOOD AND BRACKET
WITH MOUNTING SCREWS (3,9x9,5mm)
FIXING TO THE WALL
MOUNTING
SCREWS
(4,8x38mm)FLUE MOUNTING
BRACKET
FIXING TO THE CEILING
MOUNTING FLUE
SCREWS MOUNTING
(4,8x38mm) BRACKET
DECORATIVE
FLUE
DUCT TAPE
8" ROUND
METAL DUCT
- 8 -
