INSTALLATION INSTRUCTIONS

READ & SAVE THESE INSTRUCTIONS!

Quiet Hood™

QT20000 SERIES

! INTENDED FOR DOMESTIC COOKING ONLY !

IMPORTANT SAFETY INSTRUCTIONS

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1.Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.

2.Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

3.Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.

4.Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

5.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

6.Ducted fans must always be vented to the outdoors.

7.Use with approved cord-connection kit only.

8.To reduce the risk of fire, use only metal ductwork.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1.Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

2.Always turn hood ON when cooking at high heat or when cooking flaming foods.

3.Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

4.Use proper pan size. Always use cookware appropriate for the size of the surface element.

IMPORTANT SAFETY INSTRUCTIONS

1.For indoor use only.

2.For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

3.To reduce the risk of fire or electrical shock, this range hood should not be used with an additional speed control device.

4.To reduce the risk of shock, disconnect power before servicing.

5.To reduce the risk of fire and to properly exhaust air, be sure to duct air outside.

6.Your hood motor has a thermal overload which will automatically shut off the motor if it becomes overheated. The motor will restart when it cools down. If the motor continues to shut off and restart, have the hood serviced.

PLAN THE INSTALLATION

Recommended mounting height is 18” to 24” from the bottom of the range hood to the top of the cooking surface.

The hood should be mounted to the bottom of a standard wall cabinet. If the hood must be mounted directly to a wall, secure the hood to wall studs.

All wiring must comply with local codes and the unit must be properly grounded. The hood is connected to a 110-120vAC lighting circuit (15 amp) in the circuit breaker or fuse box.

This range hood is “Convertible” – it may be installed as a ducted or as a non-ducted unit.

IF THE RANGE HOOD IS TO BE NON-DUCTED:

Purchase non-ducted (duct-free) charcoal filter Model BPQTF.

IF THE RANGE HOOD IS TO BE DUCTED:

Ductwork can be installed vertically or horizontally. Duct runs should be as short as possible.

Avoid the use of elbows. Use duct tape at all joints.

Do not use duct smaller than the discharge on the hood.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING*:

1.SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

2.NEVER PICK UP A FLAMING PAN - You may be burned.

3.DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result.

4.Use an extinguisher ONLY if:

A.You know you have a Class ABC extinguisher, and you already know how to operate it.

B.The fire is small and contained in the area where it started.

C.The fire department is being called.

D.You can fight the fire with your back to an exit.

* Based on “Kitchen Firesafety Tips” published by NFPA.

For 7” round ductwork installation, use 7” round damper, Model BP87 (purchased separately).

Register your product online at: www.broan.com/register

Page 1 Page 2
Page 1
Image 1
Broan QT230BL, QT230WW, QT230SS installation instructions Important Safety Instructions, Plan the Installation
Page 1 Page 2

QT230SS, QT230BL, QT230WW specifications

The Broan QT230 series, consisting of models QT230WW, QT230BL, and QT230SS, brings a blend of style, functionality, and robust performance to your kitchen or bathroom ventilation needs. Designed with a modern aesthetic, this series features a sleek design that enhances any decor while effectively maintaining air quality.

One of the standout features of the Broan QT230 series is its quiet operation. Equipped with a powerful yet remarkably quiet motor, these units operate at a mere 0.3 sones in low speed, which ensures that your living space remains peaceful, even as unpleasant odors and excess moisture are efficiently eliminated. This is particularly valuable in open-concept living spaces where noise can easily become an issue.

The QT230 series also includes advanced technology that enhances its usability. Each model is designed with multiple speed settings, allowing users to adjust the fan speed according to their ventilation needs. Whether you’re cooking a gourmet meal or just using the bathroom, you can choose the perfect setting to maintain comfort and air quality.

Another impressive characteristic of the Broan QT230 series is its energy efficiency. These models are designed with energy-efficient motors that consume less electricity compared to conventional models, helping you save on energy bills while reducing your carbon footprint. This eco-conscious design is complemented by the effective filtration system, which captures grease and particulates from the air, ensuring your home remains fresh and clean.

Installation is also made easy with the QT230 series. The units come with a versatile design that can be mounted flush, making them suitable for various ceiling types. With easy access to the fan and filter for cleaning and maintenance, they are designed to provide long-lasting performance without hassle.

All three models in the QT230 series feature a stylish design, available in white (QT230WW), black (QT230BL), and stainless steel (QT230SS) finish. This allows homeowners to select the perfect model to match their kitchen or bathroom decor.

In summary, the Broan QT230 series is a remarkable choice for those looking for efficiency, quiet operation, and stylish design in their ventilation systems. With their advanced features and contemporary aesthetics, these range hoods and exhaust fans are ideal for enhancing the functionality and comfort of any home environment.
Top Page Image Contents