INSTALL THE HOOD

1.Remove the grease filters by pushing filter towards the back of hood and rotating filter downward.

2.Remove the metal grille by moving the 2 side fasteners.

3.Cut a hole in the bottom of the cabinet, using the dimensions shown.

4.Adjust the position of the clasping side spring by means of the proper screw, according to the thickness of the panel to which it is going to be anchored.

5.Insert the hood in the cabinet and lock it by means of the side spring.

6.Use the holes in the casing of the hood to attach it using 4 mounting screws.

7.Replace grille and filters.

CUT A HOLE IN THE BOTTOM OF

THE CABINET

10-1/4”

26-5/8”

METAL GRILLE

GREASE FILTERS

MOUNTING SCREWS

CLASPING

SIDE SPRING

min 7-16”

max 13/16”

CONNECT DUCTWORK

8” ROUND METAL DUCT

1.Connect 8" round metal duct to the discharge collar on the hood.

2.Use duct tape to make all joints secure and air tight.

- 5 -