Page 10 DPSBSS
Installing "Tee" ConnectorThe pressure regulator has an outlet pressure of not
more than eleven (11") inches water column. It must
be connected to the propane gas cylinder’s female
valve outlet before the grill and side burner can be
operated.
CAUTION: OPERATION OF A PROPANE GAS GRILL AND
SIDE BURNER WITHOUT THE PRESSURE REGULATOR AND
HOSE ASSEMBLY WILL CAUSE GAS LEAKS WHICH COULD
LEAD TO FIRE OR EXPLOSION, RESULTING IN PROPERTY
DAMAGE OR PERSONAL INJURY.
The pressure regulator’s fitting must remain clean
and free of nicks and scratches. A dirty, nicked or
scratched fitting can cause a gas leak, resulting in
an explosion or fire. Use only genuine Broilmaster®
replacement parts unless otherwise specified by the
manufacturer.
Pressure Regulator andHose AssemblyIf your grill is equipped with a factory installed gas
"tee" behind the grill’s control panel, please skip to
the next section.
Turn OFF the gas valve at the propane cylinder.
Disconnect the regulator and hose assembly from
the cylinder. Disconnect hose from the gas valve
located under the grill’s control panel. FIGURE 9.
Attach one end of the 10" S/S flex line (22) to the
end of the grill’s gas valve. Attach the other end of
the S/S flex line to the brass "tee" (20). FIGURE 10.
NOTE: GRILLS MANUFACTURED PRIOR TO 1999 MAY REQUIRE
THE ALTERNATE "TEE" CONNECTOR.
Installing “Tee” Connector(Continued)
Attach the regulator and hose assembly to the brass
tee" (20). Reconnect the assembly to the cylinder.
Use two adjustable wrenches to hold and tighten
the joint between the hose and "tee". FIGURE 12.
PROPANE GAS CONNECTION
Connecting to Propane GasAttach one end of the 34" S/S flex line (23) to the
end of the side burner valve (6). Attach the remaining
end of the hose to the "tee" (20) and use two
wrenches to tighten the S/S flex line connections.
One wrench should be used to turn the S/S flex line
connector while the "tee" or valve is held with the
second wrench. FIGURE 11.
FIGURE 12
20
FIGURE 10
Grill Gas Valve "Tee" (20)
10" S/S flex line (22)
FIGURE 9
Grill Gas Valve
Hose Assembly
FIGURE 11
34" S/S flex line (23)
"Tee" (20) 6
For old Broilmaster grill, this alternate tee fitting kit
must be ordered.