GRILL ASSEMBLY
4.Slide ignitor spacers (11) onto collector box assem- blies (10) and secure with nuts. See Figure 5. Attention: Do not cut or damage ignitor wires.
Figure 5
5.Insert collector box assemblies into holes adjacent to burners. See Figure 6.
Figure 6
6.Attach ignitor ground wire ends onto ground lugs. Slide ground lugs (12) over ignitor wires and onto collector box assemblies. Slide nuts over ignitor wires and se- cure collector box assemblies to grill. See Figure 7.
Figure 7
7.Remove ignitor from the control panel by unscrewing the ignitor button and nut. Attach ignitor wires to termi- nals on the ignitor. See Figure 8.
Figure 8
Page 10 |
